# Avoid problem with Parallel Kernel Configuration in MMA 11.2?

**URL:** <https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035>\
**Category:** Questions\
**Tags:** mathematica, external-interfaces, high-performance-computing, tuning-and-debugging, raspberry-pi\
**Created:** [March 1, 2018, 3:02am UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035 "2018-03-01T03:02:21Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![mst](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@mst](https://community.wolfram.com/u/mst)\
**Post date:** [March 1, 2018, 3:02am UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/1 "2018-03-01T03:02:21Z")

</div>

Hello, if I try anything in parallel with the latest 11.2-update of Mathematica, it tells me

> LaunchKernels::unicore: The default parallel kernel configuration does not launch any kernels on a single-core machine. Use LaunchKernels[n] to launch n kernels anyway.

> ParallelTable::nopar: No parallel kernels available; proceeding with sequential evaluation.ParallelTable::nopar: No parallel kernels available; proceeding with sequential evaluation.

But why? Never have read this before. Singlecore? Its a Pi 3…shouldn’t it be ‘quadcore’?  
Why do I no have to activate kernels manually now, what is wrong here?

How can I set 4 kerrnels as standard / permanent, so that I not have to do that manually every time again - as it was before the update?

[Support online](http://support.wolfram.com/kb/27877) does not help me much:

> to access the Parallel Kernel Configuration menu, select the menu item Evaluation ? Parallel Kernel Configuration

but there is no ‘Parallel Kernel Config’ here in my menu,

Edit:  
I also tried to add 3 more named Local1-3 in Evaluation → Kernel Config → add, but that does not work. I see in the taskmanager that theyre started on startup automatically, but wont be recognized. I still get the same errormessage and $KernelCount still says 0.

And even if I add them by hand with LaunchKernels permanent anyhow, wouldnt they be started all at once on startup then? When I am not completely wrong, they were started automatically in previous versions, only when they were needed.

I install an older version now on another sd-card to see the differences exactly…

---

<div class="post-metadata">

**Author:** ![mst](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@mst](https://community.wolfram.com/u/mst)\
**Post date:** [March 1, 2018, 6:54am UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/2 "2018-03-01T06:54:20Z")

</div>

As assumed, 11.0.1 says “Kernel Configuration ( \< 4 local kernels \> )” and “Processor Count 4” (instead of 1 on 11.2).

But why? Is it possible to fix this anyhow for ‘ourself’/to tell Mathematica that there are 4 cores permanent? Do I have to stay on the old version for parallel-evaluation? Waiting for an update?

Maybe with SetOptions possible anyhow?  
Many thanks already.

---

<div class="post-metadata">

**Author:** ![iliang](https://yyz1.discourse-cdn.com/wolfram/user_avatar/community.wolfram.com/iliang/32/11263_2.png) [@iliang](https://community.wolfram.com/u/iliang)\
**Post date:** [March 1, 2018, 4:53pm UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/3 "2018-03-01T16:53:45Z")

</div>

Try this

```
Wolfram Language 11.2.0 Engine for Linux ARM (32-bit)
Copyright 1988-2018 Wolfram Research, Inc.

In[1]:= Unprotect[$ProcessorCount]; $ProcessorCount = 4;

In[2]:= LaunchKernels[]

Out[2]= {KernelObject[1, local], KernelObject[2, local], KernelObject[3, local], KernelObject[4, local]}

```

---

<div class="post-metadata">

**Author:** ![mst](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@mst](https://community.wolfram.com/u/mst)\
**Post date:** [March 2, 2018, 6:16am UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/4 "2018-03-02T06:16:58Z")

</div>

This does not save the setting permanently and furthermore starting all kernels immediately.  
Its useful as a workaround, but not very good when you have to open many different projects or need to take care of Raspberrys very limited memory.

Best solution would be saving ‘Processor Count = 4’ permanent anyhow…or fixing its processor-detection.  
Is there a way to save the ‘Processor Count’-setting maybe?

---

<div class="post-metadata">

**Author:** ![mst](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@mst](https://community.wolfram.com/u/mst)\
**Post date:** [March 2, 2018, 9:10am UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/5 "2018-03-02T09:10:21Z")

</div>

.

---

<div class="post-metadata">

**Author:** ![iliang](https://yyz1.discourse-cdn.com/wolfram/user_avatar/community.wolfram.com/iliang/32/11263_2.png) [@iliang](https://community.wolfram.com/u/iliang)\
**Post date:** [March 2, 2018, 4:00pm UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/6 "2018-03-02T16:00:06Z")

</div>

Absolutely, this is a bug and it’s actually being fixed in the development version today.

But until the next release, as a workaround, you can add the code I suggested

```
Unprotect[$ProcessorCount]; 
$ProcessorCount = 4;

```

to your kernel `init.m` file, so it will be evaluated whenever the kernel starts up. To find the location, try

```
In[1]:= FindFile["init.m"]

Out[1]= /home/pi/.WolframEngine/Kernel/init.m

```

---

<div class="post-metadata">

**Author:** ![mst](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@mst](https://community.wolfram.com/u/mst)\
**Post date:** [March 2, 2018, 4:01pm UTC](https://community.wolfram.com/t/avoid-problem-with-parallel-kernel-configuration-in-mma-11-2/12035/7 "2018-03-02T16:01:22Z")

</div>

I now have found the preferences (hidden in help → about Wolfram → System Information → Front End → Open Preferences).

When I set 4 kernel manually in the submenu ‘Parallel’ /Local Kernels it seems to work ‘as it should’ -  
cpu-count is still 1, but Mma starts with 1 kernel only and when I run something with parallel-evaluation, 4 kernels are starting and cpu-usage gets up to 100%. Thats fine. And this setting seems to be stored permanent.

But it would be great if this getting changed/fixed in a next release yet.