# Can I specify a numerical solution method using Systemmodeler simulation?

**URL:** <https://community.wolfram.com/t/can-i-specify-a-numerical-solution-method-using-systemmodeler-simulation/21683>\
**Category:** Questions\
**Tags:** engineering, modeling, system-modeler\
**Created:** [March 2, 2023, 8:04am UTC](https://community.wolfram.com/t/can-i-specify-a-numerical-solution-method-using-systemmodeler-simulation/21683 "2023-03-02T08:04:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![1032511718](https://avatars.discourse-cdn.com/v4/letter/1/b4bc9f/32.png) [@1032511718](https://community.wolfram.com/u/1032511718)\
**Post date:** [March 2, 2023, 8:04am UTC](https://community.wolfram.com/t/can-i-specify-a-numerical-solution-method-using-systemmodeler-simulation/21683/1 "2023-03-02T08:04:27Z")

</div>

I drew a circuit on **Systemmodeler** , and I want to use the inverse Euler method to solve the circuit(And observe the error curve generated by this method). Does **Systemmodeler** support such settings? If it supports where and how I should set?

[Simulate2.mo](https://community.wolfram.com/uploads/short-url/5H8FqbRlaSZCYsey8HsNWuWN3qf.mo) (3.26 KB)

---

<div class="post-metadata">

**Author:** ![sergiov](https://yyz1.discourse-cdn.com/wolfram/user_avatar/community.wolfram.com/sergiov/32/25963_2.png) [@sergiov](https://community.wolfram.com/u/sergiov)\
**Post date:** [March 13, 2023, 1:12pm UTC](https://community.wolfram.com/t/can-i-specify-a-numerical-solution-method-using-systemmodeler-simulation/21683/2 "2023-03-13T13:12:04Z")

</div>

Since this has been answered [here](https://community.wolfram.com/groups/-/m/t/2847728) , consider removing this post.