Hi all,
Currently using trial and playing with functionality. I did some simple battery cell model in SystemModeler:
in Mathematica I am running:
celMdl = SystemModel["cell"]
in best case Mathematica produces error: SystemModel: cell is not loaded model
Then I realized that I have to open this model in SystemModeler before trying to import it.
But in that case Mathematica just crashes without any prompt.
Related Modelica code:
model cell "Одна батарейка батареї"
Modelica.Electrical.Batteries.BatteryStacksWithSensors.CellRC cellRC(cellData = cellData, useHeatPort = true, SOC0 = initialSOC) annotation(Placement(visible = true, transformation(origin = {-0.038, 40}, extent = {{-55.962, -55.962}, {55.962, 55.962}}, rotation = 0)));
parameter Modelica.Electrical.Batteries.ParameterRecords.TransientData.CellData cellData(rcData = {rcData}, Qnom = nominalChargeCapacity, Ri(nominal = 0.001) = internalResistance, OCVmax = OCVmax, OCVmin = 3.6, useLinearSOCDependency = false, OCV_SOC = OCVSOCtable) annotation(Placement(visible = true, transformation(origin = {-12.5, 80}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
parameter Modelica.Electrical.Batteries.ParameterRecords.TransientData.RCData rcData(R = equivalentCircuitResistance, C = equivalentCircuitCapacitance) = Modelica.Electrical.Batteries.ParameterRecords.TransientData.RCData(R = 0.0005, C = 0.0004) annotation(Placement(visible = true, transformation(origin = {12.5, 80}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
Modelica.Electrical.Batteries.Interfaces.CellBus cellBus annotation(Placement(visible = true, transformation(origin = {-33.62, -89.962}, extent = {{-10, -10}, {10, 10}}, rotation = 0), iconTransformation(origin = {-54.067, -51.555}, extent = {{-10, -10}, {10, 10}}, rotation = -360)));
Modelica.Thermal.HeatTransfer.Interfaces.HeatPort_a port_a annotation(Placement(visible = true, transformation(origin = {0, -90}, extent = {{-10, -10}, {10, 10}}, rotation = 0), iconTransformation(origin = {-2.084, -52.596}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
Modelica.Electrical.Analog.Interfaces.PositivePin pin_p annotation(Placement(visible = true, transformation(origin = {-150, 40}, extent = {{-10, -10}, {10, 10}}, rotation = 0), iconTransformation(origin = {-100, 0}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
Modelica.Electrical.Analog.Interfaces.NegativePin pin_n annotation(Placement(visible = true, transformation(origin = {150, 40}, extent = {{-10, -10}, {10, 10}}, rotation = 0), iconTransformation(origin = {100, -4.167}, extent = {{-10, -10}, {10, 10}}, rotation = 0)));
Modelica.Thermal.HeatTransfer.Components.HeatCapacitor heatCapacitor(C = heatCapacity, T.start = 293.15) annotation(Placement(visible = true, transformation(origin = {73.93, -18.93}, extent = {{-29.93, -29.93}, {29.93, 29.93}}, rotation = -90)));
parameter Modelica.Units.SI.HeatCapacity heatCapacity = 980 * 0.06 "Питома теплоємність електричної батарейки" annotation(Dialog(tab = "Термофізичні властивості"));
parameter Real initialSOC = 1 "Почтаковий стан заряду батареї";
parameter Modelica.Units.NonSI.ElectricCharge_Ah nominalChargeCapacity = 5 "Ємність батареї";
parameter Modelica.Units.SI.Resistance internalResistance = 0.001 "Внутрішній опір батареї";
parameter Modelica.Units.SI.Voltage OCVmax = 4.2 "Максимальна напруга батареї";
parameter Modelica.Units.SI.Resistance equivalentCircuitResistance = 0.0003;
parameter Modelica.Units.SI.Capacitance equivalentCircuitCapacitance = 0.000001;
parameter Real OCVSOCtable[:, 2] = {{0.0, 0.8571428571428571}, {1.0, 1.0}};
Modelica.Thermal.HeatTransfer.Components.ThermalConductor thermalConductor(G = thermalConductivityCoeff * surfaceArea / radius) annotation(Placement(visible = true, transformation(origin = {0, -52.584}, extent = {{-10, -10}, {10, 10}}, rotation = -90)));
parameter Modelica.Units.SI.Area surfaceArea = 2 * 3.14 * 0.016 * 0.08 "Площа поверхні батареї";
parameter Real radius = 0.009 "Радіус батареї";
parameter Modelica.Units.SI.ThermalConductivity thermalConductivityCoeff = 85 "Коефіцієнт теплопровідності батареї";
equation
connect(cellRC.cellBus, cellBus) annotation(Line(visible = true, origin = {-33.617, -61.565}, points = {{0.002, 56.795}, {0.002, -28.397}, {-0.003, -28.397}}, color = {255, 204, 51}, thickness = 0.5));
connect(cellRC.n, pin_n) annotation(Line(visible = true, origin = {102.962, 40}, points = {{-47.038, 0}, {47.038, 0}}, color = {0, 0, 255}));
connect(cellRC.p, pin_p) annotation(Line(visible = true, origin = {-103, 40}, points = {{47, 0}, {-47, 0}}, color = {0, 0, 255}));
connect(heatCapacitor.port, cellRC.heatPort) annotation(Line(visible = true, origin = {14.641, -17.941}, points = {{29.359, -0.989}, {-14.679, -0.989}, {-14.679, 1.979}}, color = {191, 0, 0}));
connect(thermalConductor.port_a, cellRC.heatPort) annotation(Line(visible = true, origin = {-0.019, -33.429}, points = {{0.019, -9.156}, {0.019, -4.156}, {-0.019, -4.156}, {-0.019, 17.467}}, color = {191, 0, 0}));
connect(port_a, thermalConductor.port_b) annotation(Line(visible = true, origin = {0, -76.292}, points = {{0, -13.708}, {0, 13.708}}, color = {191, 0, 0}));
annotation(uses(Modelica(version = "4.0.0")), experiment(StopTime = 10.0), version = "1", Diagram(coordinateSystem(extent = {{-150, -90}, {150, 90}}, preserveAspectRatio = true, initialScale = 0.1, grid = {5, 5})), Icon(coordinateSystem(extent = {{-100, -100}, {100, 100}}, preserveAspectRatio = true, initialScale = 0.1, grid = {10, 10}), graphics = {Rectangle(visible = true, rotation = -90, lineColor = {128, 0, 0}, fillColor = {55, 142, 255}, pattern = LinePattern.None, fillPattern = FillPattern.Sphere, extent = {{-50, -100}, {50, 100}}, radius = 25), Polygon(visible = true, origin = {-7.143, 14.286}, lineColor = {255, 255, 255}, fillColor = {255, 255, 255}, fillPattern = FillPattern.Solid, points = {{7.143, 33.315}, {7.143, -4.286}, {57.143, -4.286}, {7.143, -57.603}, {7.143, -24.286}, {-42.857, -24.286}})}));
end cell;