# Unable to use wolframscript on Raspberry pi 4?

**URL:** <https://community.wolfram.com/t/unable-to-use-wolframscript-on-raspberry-pi-4/15408>\
**Category:** Questions\
**Tags:** mathematica, external-interfaces, tuning-and-debugging, raspberry-pi, wolfram-engine\
**Created:** [February 22, 2020, 2:28pm UTC](https://community.wolfram.com/t/unable-to-use-wolframscript-on-raspberry-pi-4/15408 "2020-02-22T14:28:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![blp330](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@blp330](https://community.wolfram.com/u/blp330)\
**Post date:** [February 22, 2020, 2:28pm UTC](https://community.wolfram.com/t/unable-to-use-wolframscript-on-raspberry-pi-4/15408/1 "2020-02-22T14:28:48Z")

</div>

Hi,

On my Raspbian, when I RUN:  
wolframscript -code 2+2

I got this error message:  
wolfram cannot determine operating system.

I am not sure about what happen, maybe because I switched to Raspbian 64bits kernel?  
What should I do to make it work if I don’t switch back? (I even don’t it works or not on 32bits Raspbian)  
Thanks.

---

<div class="post-metadata">

**Author:** ![iliang](https://yyz1.discourse-cdn.com/wolfram/user_avatar/community.wolfram.com/iliang/32/11263_2.png) [@iliang](https://community.wolfram.com/u/iliang)\
**Post date:** [February 24, 2020, 4:25am UTC](https://community.wolfram.com/t/unable-to-use-wolframscript-on-raspberry-pi-4/15408/2 "2020-02-24T04:25:57Z")

</div>

Try setting the SystemIDList environment variable, for example

```
SystemIDList=Linux-ARM wolframscript -code 2+2

```

---

<div class="post-metadata">

**Author:** ![blp330](https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/32.png) [@blp330](https://community.wolfram.com/u/blp330)\
**Post date:** [February 24, 2020, 12:14pm UTC](https://community.wolfram.com/t/unable-to-use-wolframscript-on-raspberry-pi-4/15408/3 "2020-02-24T12:14:14Z")

</div>

It works, thanks 🙂
